Call us: +966 11 265 1212 | E-mail: saglass@saglass.com

Glass is the ideal material to use in order to clad the Facades of Buildings. It allows Natural Daylighting to pass in and enables occupants to get clear, unimpeded, vision out. However, unless it is properly controlled it is not an effective barrier to the passage of both heat and cold.

Given Saudi Arabia’s hot climatic conditions, the radiant heat directly from the Sun and the Conducted and Convected heat from the Air must be controlled or it may pass through the Glazed Facades and put excessive pressures on Air Conditioning Systems. Saudi American Glass have developed a wide range of K-Lite Solar Control and Low Emissivity Glasses specifically designed to offer this control.

 

The K-LITE range 3 main product categories:

  • In Double Glazed Units as well as in Single Glazing.
  • Available in pre-tempered only: cut-to-size by SAG.
  • Durable coating: Edge deletion not required.
  • Coating position: surface #2.
  • Silicone bonding sealants can be applied directly to the coating.
  • Can be used as single glazing for spandrel applications.
  • READ MORE
  • In Double Glazed Units only.
  • Available in pre-tempered only: cut-to-size by SAG.
  • Edge deletion required
  • Coating position: surface #2.
  • K-LITE Optima series is design to provide good solar resistance combined with good thermal insulation and is suitable for a cooling-dominated environment where good SHGC an U-value performance are required to ensure lower solar heat gain and optimum efficiency of air-conditioning equipment.
  • READ MORE
  • In Double Glazed Units only.
  • Available in pre-tempered only: cut-to-size by SAG.
  • Edge deletion required.
  • This is a standard Low-E range in which the coating position can be on surface #2 (KE-742) for cooling dominated environments or on surface #3 (KE-743) for heating-dominated environments. Solar resistance varies according to tint of outer pane.
  • READ MORE
Top